Reference Design Node

Home

Design Center

Learning Center

Product Center

Company Directory

Careers

Site Features

Power Supplies

• IR: Optimized Single-Phase 5A And 12A Synchronous Buck Reference Designs

Based on IR's POWIR+ Chipsets and enhanced on-line design services

International Rectifier — HTML

• Microchip Technology Introduces DsPICDEM™ Buck Switch-Mode Power Supply (SMPS) Development Board

Board Comes With Software and Hands-On Exercises to Help Designers Quickly Evaluate and Develop Digital SMPS and Other Power-Conversion Products

Microchip — HTML

• PMP206 - Highly Efficient 100W Isolated Power Supply ...

This reference design is an active-clamp forward converter that can deliver up to 30 A of continuous current at 3.3 V from an input range of 35 V to 72 V.

Texas Instruments — HTML

• PMP841 - Non-Isolated PoE PD Power Supply Reference ...

PMP841 is a high efficiency, non-isolated Power-over-Ethernet PD power supply reference design intended to ease implementation of PoE in devices such as IP ...

Texas Instruments — HTML

• Isolated, Low Cost, Non-Synchronous PoE PD Power Supply Reference ...

PMP717 is a low cost, isolated, non-synchrounous Power-over-Ethernet PD power supply reference design intended to ease implementation of PoE in devices such as IP phones, WLAN AP's and security...

Texas Instruments — HTML

• Power Over Ethernet - Sync Flyback Reference Design - PMP411 ...

This reference design describes an easy-to-use, low cost isolated power supply to be used in Power-over-Ethernet Powered Devices (PD's).

Texas Instruments — HTML

• PMP386 - Power Over Ethernet - Sync Flyback ...

This reference design describes an easy-to-use, low cost isolated power supply to be used in Power-over-Ethernet Powered Devices

Texas Instruments — HTML

• Reference Design Cookbook - Power Management

Reference Design Cookbook for Power Management Products ... tool to aid in quickly achieving high-performance power supply designs

Texas Instruments — PDF

• STR-A6151 Universal-Input, 10 W Power Supply

This document describes a reference design for a general-use, universal-input, 10 W (5 V/2 A) ac-dc power supply design with STR-A6151. ...

Allegro Microsystems — PDF

• STR-W6754 Universal-Input, 41 W Power Supply

This reference design describes a general-use, universal-input, 41 W output power (5 V and 20 V) ac-dc power supply design with STR-W6754. ...

Allegro Microsystems — PDF

• STR-A6159 Universal-Input 7 W Power Supply

This document describes a reference design for a general-use, universal-input, 7 W (5 V/1.4 A) ac-dc power supply design with STR-A6159. ...

Allegro Microsystems — PDF

• STR-W6756 Universal-Input 140 W Power Supply

This reference design describes a general use universal input, dual output (15 V, 140 W) ac/dc power supply design using the STR-W6756. ...

Allegro Microsystems — PDF

• Implementing A Digital AC/DC Switched-Mode Power Supply ...

The main purpose of a power supply is to provide regulated and. stable power to a load, ... manuals on the hardware and software, reference design ...

Freescale — PDF

• International Rectifier Power Supply Reference Designs

Reference Designs include a fully working and tested assembled design with all the needed documentation including schematics, Bill of Material, Board Layout, application notes, silk screen, and...

International Rectifier — HTML

• International Rectifier - AC-DC Reference Design Kits

Each reference design kit includes a fully assembled and tested demo board

International Rectifier — HTML

• Reference Design For Flyback Topology AC-DC Power Supplies

Using IR's IRIS4009 AC-DC integrated switcher as the main switch and control device, the IRISMPS4 reference design features a universal AC line input and 12V, 1A full load DC output.

International Rectifier — HTML

• International Rectifier - DC-DC Reference Design Kits

Each reference design kit includes a fully assembled and tested demo board

International Rectifier — HTML

• International Rectifier Introduces 90W Flyback Reference Design

The reference design is a universal input, 15V, 6A output AC-DC power supply that

International Rectifier — HTML

• MAX5074 5V, 3A Reference Design - Maxim/Dallas

The MAX5074 circuit serves as a reference design for a 5V, 3A, DC-DC step-down power operating from a from a 36V to 72V source

Maxim — HTML

• Intelligent Power Supplies Design Center: Intermediate DC-DC Module

This reference design demonstrates how a simple 14-pin microcontroller with a PWM module can be used to control a traditional switch mode power supply ...

Microchip — HTML

• Intelligent Power Supplies Design Center: Point Of Load Module

Larger system distributed systems for telecommunications and computer networks typically employ a distributed power system which consists of an intermediate bus voltage, between 24 and 48 volts,...

Microchip — HTML

• Intelligent Power Supplies Design Center: The AC-DC Block

The AC-DC block contains at least one rectifying bridge, but this will be followed by buck or boost circuits of various complexity

Microchip — HTML

• Intelligent Power Supplies Design Center: Inverter Module

This reference design demonstrates a full bridge DC-to-AC conversion with a sinusoidal output. The design also includes AC rectification and power factor correction

Microchip — HTML

• Power Supply Design Using WEBENCH

National can provide the customer with a plug-in power supply design

National Semiconductor — PDF

• Power Supply Design And The Thinking Engineer

The first step in online power supply design is defining the power supply requirements, including voltage range, output voltage(s) and load current(s).

National Semiconductor — HTML

• National Edge - Rich And Varied Communications System Power Supply ...

Semiconductor suppliers are enabling power supply system designers to embed low-cost compact isolated power supplies directly onto their motherboards and line cards.

National Semiconductor — HTML

• ON Semiconductor Introduces Its Fourth GreenPoint™ Power Supply Reference Design

New 220 watt LCD-TV power supply solution delivers standby power of less than 1 watt

On Semiconductor — HTML

• Industry'S First 80 PLUS Compliant Open Reference Design

A High-Efficiency GreenPoint™ Solution

On Semiconductor — HTML

• ON Semiconductor Introduces A GreenPoint™ Reference Design For Notebook Power Adapters

The new 90 watt power adapter solution delivers 90 percent efficiency and design simplicity

On Semiconductor — HTML

• ON Semiconductor Introduces A Highly Efficient GreenPoint™ Reference Design For 60 Watt Power Adapters

The new power adapter solution delivers 88 percent efficiency and true design simplicity for adapters used to power LCD TVs and monitors, notebooks and other consumer applications

On Semiconductor — HTML

• 160 W CRT TV Power Supply Reference Design

Standby Power

On Semiconductor — HTML

• Single-Phase POL Reference Design

The Si825x Single-Phase POL Reference Design demonstrates a digitally-controlled point-of-load (POL) power supply operating at a switching frequency of 391 kHz ...

Silicon Laboratories — HTML

• STMicroelectronics | High Power 3-Phase Auxiliary Power Supply ...

High Power 3-Phase Auxiliary Power Supply Design Based on L5991 and ESBT

STMicroelectronics — HTML

• VIPer53 Dual Output Off-Line Wide Range Power Supply...

This board is an off-line wide range dual output general-purpose power supply capable of delivering up to 24W through ...

STMicroelectronics — HTML

• 850kHz 700mA Buck Regulator

The AAT1151 MSOP evaluation board demonstrates performance, along with the suggested size and placement of external components, for the AAT1151 integrated buck regulator.

Analogic Tech — PDF

• 1MHz 2.5A Buck DC/DC Converter

The AAT1155 evaluation board demonstrates performance, along with the suggested size and placement of external components, for the AAT1155 integrated buck regulator.

Analogic Tech — PDF

• 1MHz 700mA Buck Regulator

The AAT1156 evaluation board demonstrates performance, along with the suggested size and component placement

Analogic Tech — PDF

• 500W Power Factor Corrected Zero Voltage Switched Off-Line Power Supply Evaluation Board

The FEB110-001 Evaluation Board is a power factor corrected 500 W off-line power supply with zero voltage switching. The supply has a single 400 Volt output ...

Fairchild Semiconductor — HTML

• 240W PFC And PWM Combo ...

The FEB107-001 Evaluation Board is a power factor corrected 12V 20A off-line power supply. It is designed to meet IEC1000-3-2 over the universal input voltage range of 85 to 265VAC

Fairchild Semiconductor — HTML

• Power Factor Corrected 500 W Off-Line Power Supply

The FAN4810 Evaluation Board is a power factor corrected 500 W off-line power supply. The supply has a single 400 Volt output and operates over an input voltage range of 90 VAC to 265 VAC...

Fairchild Semiconductor — HTML

• 100W Power Factor Corrected Off-Line Power Supply Evaluation Board

The FEB112-001 Evaluation Board is a power factor corrected 100 W off-line power supply. The supply has a single 400 Volt output and operates over an input voltage range of 85 VAC to 265 VAC

Fairchild Semiconductor — HTML

• 100W PWM And PFC Combo ...

The FEB111-001 Evaluation Board is a power factor corrected, 100 Watt, off-line switching power supply with a single output of +12 VDC. ...

Fairchild Semiconductor — HTML

• Linear Technology - Power Management

The LTM4600 is a complete 10A switchmode step-down power supply with ...

Linear Technology — HTML

• Evaluation And Demo Boards For Power Management Supply Products

Note: you must have Protel or an application that can open Protel PCB layout files in order to read these Protel files.

National Semiconductor — HTML

Lighting

• Lumileds Releases Reference Design For LED-Based Camera Phone Flash

Delivers 72 Lumens at Up to 2 Meters Utilizing Lumileds Luxeon LEDs

Lumileds Lighting — PDF

• Luxeon For Flashlight Applications

This reference design outlines the key considerations for engineering a Luxeon-based flashlight

Lumileds Lighting — PDF

• Powering Multiple White LEDs, PWM & Digital Dimming Control Using TPS61060/1/2

The TPS61060/1/2 are inductive, high-frequency, synchronous boost converters with a constant current output to drive up to 5 white LEDs. The reference design and application examples shown in this...

Texas Instruments — HTML

• SG2068 Digitally Controlled Electronic Lighting Ballast-Building ...

This reference design. describes the design of a fully digital dimmable light ballast with power ...

Freescale — PDF

• Dimmable Light Ballast With PFC Using MC68HC908LB8

This reference design describes the design of a fully digital dimmable light ballast with power factor correction control, for two parallel connected fluorescent lamps...

Freescale — HTML

• Digital Addressable Lighting Interface (DALI) For Lighting Networks

Subscribe RDHC908KX8DALI : Digital Addressable Lighting Interface The drive for Energy Conservation and Intelligent Building Automation has led to the development of the DALI standard for control...

Freescale — HTML

• International Rectifier - Lighting Reference Design Kits

International Rectifier offers a wide range of reference designs for Lighting applications. Each reference design kit includes a fully assembled and tested ...

International Rectifier — HTML

• Pre-Fabricated Reference Design For IR2161 Halogen Transformer IC

The reference design is a pre-fabricated and proven circuit for halogen lighting applications, which can simplify the design process and streamline ...

International Rectifier — HTML

• International Rectifier Introduces A New Three-Way Dimming Approach That Can Deploy Energy-Saving Fluorescent Lamps Without Retrofit

The reference design contains an IR2156 ballast control IC, a working three-way dimming ballast, board layout and silkscreen files, reference design documentation, bill of materials, data sheet, IR...

International Rectifier — HTML

• TPS60230 White LED Charge Pump Used In Smart Phone Displays, LCDs ...

The reference design and. applications examples shown in this guide describe typical phone display, LCD backlight, and keyboard lighting applications. ...

Texas Instruments — PDF

• Extending Battery Life With The TPS61040 Low Power DC-DC Boost Converter

This document describes application examples and reference designs for the TPS61040 boost converter. The following application example describes how to implement the TPS61040 low-power, dc-dc boost...

Texas Instruments — HTML

• LED Display System Module Using Cascading TLC5940 Devices

The reference design implements three TLC5940 devices to drive 16 LEDs.

Texas Instruments — HTML

• Charging Photo-Flash Capacitors Using The TPS65552A

This document contains a reference design and an example of a PCB design using the TPS65552A

Texas Instruments — HTML

• TPS61150 Dual Output Boost Converter Drive Up To 14 WLED Keypad LCD Backlight

The TPS61150/1 is a high-frequency boost converter with two regulated current outputs for driving white light-emitting diodes (WLED). The reference design and applications examples in this document...

Texas Instruments — HTML

• Clamshell Phone W/OLED/LCD Screen Using The TPS61140 Dial Output Boost Regulator

The reference design and application example shown in this document can be used to power a clamshell phone with an organic light-emitting diode (OLED) and a LCD screen. This device is ideal for...

Texas Instruments — HTML

Battery Charger

• Reference Design Cookbook - Power Management

Reference Design Cookbook for Power Management Products ... The bq241xx is a synchronous, switch-mode battery charger with internal power ...

Texas Instruments — PDF

• Single Output Reference Designs

Texas Instruments — HTML

• AVR450: Battery Charger For SLA, NiCd, NiMH And Li-Ion Batteries

This Reference Design is a battery charger that fully implements the latest technology in battery charger designs. The charger can fast-charge all popular battery types without any hardware...

Atmel — HTML

• DRM051/D: NiMH Battery Charger Reference Design

This manual describes a reference design for a NiMH battery charger that uses the Motorola MC68H(R)C908JK3E MCU.

Freescale — PDF

• RD68HC908LBC : Li-Ion Battery Charger Reference Design

This reference design describes a Li-ion battery charger for one 3.6V Li-ion battery cell by using the low cost 8-pin MC68HC908QT2 MCU

Freescale — HTML

• Li-Ion Battery Charger

This manual describes a reference design of Li-ion battery charger for mobile phone cell by using a MC68HC908QY/QT MCU.

Freescale — PDF

• DS2770-Based Battery Monitor And Charger Reference Design - Maxim ...

Provides a reference design for the DS2770 Battery Monitor and Charge Controller

Maxim — HTML

• MCP7384x Li-Ion Battery Charger Evaluation Board

The MCP7384X Li-Ion Battery Charger Evaluation Board features three circuits utilizing the MCP73841, MCP73842 and MCP73843 devices to demonstrate simple, stand-alone, linear charging of single or...

Microchip — HTML

• SMBus Level-3 Battery Charger/Selector Reference Design Based On The PIC16C73A

The PICREF-5 Reference Design offers a ready-made SMBus Level-3 battery charger/selector solution.

Microchip — HTML

• Z8 Encore!® Based AA Type NiMH And NiCd Battery Charger

This reference design demonstrates AA type NiMH and NiCd battery charger using 28-pin Z8 Encore!® 8K Series MCU. The battery status information and battery type selection are controlled by the...

Zilog — HTML

• DC783A - LTC4060 Evaluation Kit DC783A

Standalone Linear NiMH/NiCd Fast Battery Charger

Linear Technology — HTML

• DC101C - LT1511 Evaluation Kit DC101C

The DC101 board is a standalone Smart Battery charger that receives Charging Voltage(), Charging Current() and AlarmWarning() commands from the Smart Battery via the System Management Bus (SMBus)...

Linear Technology — HTML

• DC512 - LTC4100 Evaluation Kit DC512A

Demonstration circuit DC512 is a single battery switching buck charge controller featuring the LTC4100

Linear Technology — HTML

• DC498A - LTC4007 Evaluation Kit DC498A

4A, High Efficiency, Standalone Li-Ion Battery Charger

Linear Technology — HTML

• DC551 - LTC4002 Evaluation Kit DC551A-A DC551A-B

Standalone Li-Ion Switch Mode Battery Charger ...

Linear Technology — HTML

• DC496B - LTC4008 Evaluation Kit DC496B

Evaluation Kit For LTC4008 - 4A, High Efficiency, Multi-Chemistry Battery Charger. ...

Linear Technology — HTML

• MAX1736EVKIT Evaluation Kit For The MAX1736

The MAX1736 evaluation kit (EV kit) is a fully assembled and tested circuit board containing a single-cell lithium-ion (Li+) battery charger.

Maxim — HTML

• MAX8731EVKIT Evaluation Kit/Evaluation System For The MAX8731

The MAX8731 evaluation kit (EV kit) is an efficient, multichemistry battery charger. It uses the Intel® system management bus (SMBus™) to control the battery-regulation voltage, charger current...

Maxim — HTML

• MAX8713EVKIT Evaluation Kit For The MAX8713

The MAX8713 evaluation kit (EV kit) is an efficient, multichemistry battery charger. It uses the Intel® system management bus (SMBus™) to control the battery regulation voltage and charger...

Maxim — HTML

• MAX8606EVKIT Evaluation Kit For The MAX8606

The MAX8606 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board demonstrating the MAX8606 linear charger for single-cell Li+ batteries.

Maxim — HTML

• MAX1898EVKIT Evaluation Kit For The MAX1898

The MAX1898 evaluation kit (EV kit) is a complete, fully assembled and tested single-cell lithium-ion (Li+) battery charger. The EV kit charges a single Li+ ...

Maxim — HTML

Browse Reference Designs by Category

Search Reference Designs by Keyword

Search Reference Designs by Company

To submit information for the Reference Design Library, email rkeenan@cmp.com.